. Home | Rosshuit Electronic Center | Amplificadores Peavey

 

 

 

 

 

 

 

 

   
 
     
     


The new PV® Series power amps retain their two-channel design, high power points and exclusive Peavey features and technologies—such as DDT™ compression and Peavey patented Turbo-V™ Cooling. The PV® 900 delivers 300 watts per side into 4 ohms, 180 watts into 8 ohms and features detented input gain controls. It's a real workhorse.

* 2x300 watts at 4 ohms
* 2x180 watts at 8 ohms
* Massive toroidal transformer and storage capacitors
* Peavey patented Turbo-V cooling system with 2-speed demand-sensitive fan
* Built-in 150 Hz/18 dB/oct subwoofer crossover with TRS output
* DDT™ soft limiter protects amp and speakers
* 14 gauge steel chassis
* Rear rack supports
* Mil spec fiberglass circuit boards
* Current in-rush limiter
* Overheat, short circuit, clip limiting, DC, and faulty load protection
* Detent gain controls
* Neutrik® Speakon® and 5-way binding post outputs
* 5-year warranty

   
         
     
  All the features and proven reliability. The PV® 1500 features DDT™ distortion detection technique virtually eliminating distortion. It also features Peavey's patented Turbo-V™ cooling design, which cools the power transistors more evenly than traditional heat-sink designs.

* 2x500 watts at 4 ohms
* 2x300 watts at 8 ohms
* Massive toroidal transformer and storage capacitors
* Peavey patented Turbo-V® cooling system with 2-speed demand-sensitive fan
* Built-in 150 Hz/18 dB/oct subwoofer crossover with TRS output
* DDT™ soft limiter protects amp and speakers
* 14 gauge steel chassis
* Rear rack supports
* Mil spec fiberglass circuit boards
* Current in-rush limiter
* Overheat, short circuit, clip limiting, DC, and faulty load protection
* Detent gain controls
* Neutrik® Speakon® and 5-way binding post outputs
* 5-year warranty

   
   

 

   
     
 
The PV 1600 Bi-Pack is an integrated, all-in-one power solution for bi-amping non-powered speakers such as the Peavey SP™ 2, SP 4 or Impulse® 1015. The PV 1600 Bi-Pack delivers 930 watts to woofers (lows) and 350 watts to compression drivers (highs) through a specialized crossover with built-in EQ and phase adjustment. In addition to a 50 Hz bass boost with roll off, a gentle slope throughout the rest of the low frequency range is utilized up to the crossover frequency.

* Integrated bi-amp package
* 930 watts @ 4 ohms for lows
* 350 watts @ 4 ohms for highs
* Specially engineered electronic crossover/processing package for SP 2, SP 4 or Impulse 1015 speakers
* Combo XLR-1/4" input
* High and low thru jacks
* Four-conductor Neutrik® Speakon® NL4 outputs
* Temperature-controlled fan
* 2RU

   
         
     
  Massive power in a small package. The PV® 2600 has XLR, 1/4 inch and barrier strip inputs with Peavey's famous DDT™ compression system, binding post and Speakon® output connectors.

* 2x900 watts at 4 ohms
* 2x550 watts at 8 ohms
* Massive toroidal transformer and storage capacitors
* Peavey patented Turbo-V® cooling system with 2-speed demand-sensitive fan
* Built-in 150 Hz/18 dB/oct subwoofer crossover with TRS output
* DDT™ soft limiter protects amp and speakers
* 14 gauge steel chassis
* Rear rack supports
* Mil spec fiberglass circuit boards
* Current in-rush limiter
* Overheat, short circuit, clip limiting, DC, and faulty load protection
* Detent gain controls
* Neutrik® Speakon® and 5-way binding post outputs
* 5-year warranty

   
         
     
  Add a 3,800-watt PV 3800 amp to your Bi-Pack system for a tri-amped system! Our highest-power PV Series power amp utilizes a crossover specially tailored for subwoofers and the high power necessary to drive them. Load Fault Correction circuitry along with our famous DDT™ speaker protection and Turn On/Turn Off protection allow operation with greater efficiency, even under difficult loads and power conditions. The PV 3800 connects to a PV 1600 Bi-Pack through a simple 1/4" or XLR cable.

* Two-channel power amp with DDT protection
* Turn On/Turn Off protection
* Load Fault Correction
* 1300 W/ch @ 4 ohms
* 775 W/ch @ 8 ohms
* 2650 W bridged @ 8 ohms
* Twin temperature-dependant, variable-speed fans
* 2RU

   
         
       
 
   
   
 
Donde Compro
Servicios al Cliente
Soporte Tecnico
Acerca de Rosshuit
 

On Line & Rosshuit Directo

Tiendas y Distribuidores Autorizados

Descarga el Catalogo de Productos Rosshuit

Servicio a Clientes

Status de tu Orden

Registra tu Producto

Tiempo de Entrega

 

Sopórte para Casa

Sopórte para Empresas

Downloads & Drivers

Soporte por Producto

Información Corporativa

Terminos de Venta

Terminos de Uso del Sitio

Tiempo de Entrega

Politicas de Privacidad

       

Todas las imagenes marcas y nombres de otras compañías mostradas en este sitio se utilizan con fines Ilustrativos y son propiedad de sus respectivas firmas.

Copyright 2000 - 2007 Rosshuit Technologies